Electronic tag 4G network reader WE-RGF02

 Product Features

◆ Support 4G full network pass LTE-TD/FDD, can detect 1000 electronic tags at the same time

◆ Long reading distance, 3.5dB common tag 100 meters, 20dB high power tag 200 meters.

◆ Built-in 5000mAh lithium polymer battery, fully charged without charging can continue to work for 48 hours.

◆ Using monocrystalline silicon solar panels of 50W or more, it can maintain 50% power on long term cloudy and rainy days.

◆ Real-time reporting of the device's remaining battery power and current solar panel charging status.

◆ It can measure the wireless signal field strength of the electronic tag and estimate the approximate distance of the electronic tag.

◆ Possibility to call tags for audible and visual reminders (audible and visual tags only)

◆ High waterproof grade, can be used outdoors directly without additional protective measures.

◆Open protocols are provided so that third-party systems can easily access the card reader over the Internet.

¥778

WE-RGF02 card reader through 4G LTE wireless access to the network, can be quickly deployed in the place where there is a 4G network signal card reader base station, reading distance open up to 100 meters (ordinary power tags).

When deployed outdoors, the card reader is powered by a tera-energy panel with a built-in 5000mAh lithium battery for energy storage, and the IP67 waterproof design of the casing allows for quick installation into a variety of harsh environments. Card reader supporting more than 50W monocrystalline silicon solar panels to use, can ensure that in the long-term rainy day work when the power is not less than 50%.

At present, the 4G network reads the card already to be widely used to many cities the public transportation bus to report the station system in, installs the high power solar energy electron label in the public transportation bus, the public transportation station installs the 4G network reads the card, the public transportation bus enters the station within 200 meters, will be reads the card reader to read to, reports the vehicles to the station information to report to the station system, reports to the station system to then sends out that the public transportation bus's position information to the along the road each station information screen.

In addition to bus stop announcement systems, 4G network card readers are often used in smart construction site systems to achieve regional positioning of construction site workers due to their fast deployment.

Weight 550 g
Dimensions 115 × 90 × 55 mm

specification

sports event norm
indicator light Each time the green light flashes: tag data is read once

Flashes red one at a time: the battery is low.

Flashes red two times at a time: 4G wireless network failure.

Flashes red three times at a time: the card reader cannot connect to the Internet server.

Green light and red light flash once alternately: the equipment is idle and running normally.

4G wireless LTE-TD bands: B34/B38/B39/B40/B41

LTE-FDD bands: B1/B3/B5/B8

LTE-TD Sensitivity: -100dBm (10M)

LTE-FDD sensitivity: -99dBm (10M)

LTE-TD transmit power: Class3 (23dBm+1/-3dB)

LTE-FDD transmit power: Class3 (23dBm+-2dB)

Card Reader Antenna Communication interface: RS232 serial port
Baud rate: 115200, 57600, 38400, 19200, 9600bps
Interface specification: 4P terminal header (5V, GND, TXD, RXD)
USB Parameter Setting USB-mini interface, CH340 driver virtual serial port, Windows setup software.
Internal storage battery 7.4V 5000mAh Lithium Polymer Battery

Operating temperature -40℃~70℃, ideal temperature 10℃~40℃.

Operating temperature and humidity -40℃~70℃, humidity less than 95% (no condensation)
Installation Ceiling Mount / Wall Mount
power supply (of an appliance etc) Amorphous silicon solar panels (open circuit voltage 16V~28V)
sizes 115mm × 90mm × 55mm (excluding fixing lugs on both sides)
weights 550g

interface diagram

Resource support

Electronic tag 4G network reader WE-RGF02 product manual

software package

en_USEnglish