PLC remote monitoring and downloading device support Mitsubishi Omron and other PLC serial port network port to WiFi Ethernet EW200 
Mini RS485 to Ethernet Serial Server WE-E204S 
Product Features
- Industrial quality, stable and reliable, encrypted data transmission through transmission
- Watchdog circuit design ensures 24-hour continuous operation
- 4G Full Netcom
- 5-mode, 13-frequency
- Independent external MCU
- Virtual serial port, remote management, support for AliCloud services
- Firmware can be upgraded remotely over the network
- Users can send messages to the device to configure parameters through the M2M SMS platform
- 5V-36V wide voltage operating range, power supply anti-reverse function
- Static ESD protection
¥360
Product Overview
WE-D280 is a 5-mode all-network 4G DTU, which supports mobile, Unicom 2G/3G/4G, and Telecom 4G networks, and the network supports maximum downlink rate of 150Mbps and maximum uplink rate of 50Mbps.
WE-D280 built-in rich network protocols, integrated RS232/RS485 standard data transmission interface, easy to use traditional serial devices networking
Application Areas
WE-D280 module connects serial devices to the Internet and transfers serial data in compliance with the TCP/IP protocol.
- Remote equipment monitoring
- Production Asset Tracking and Monitoring
- Security
- Industrial Sensors and Controllers
- Healthcare equipment
- ATM equipment
- Data acquisition equipment
- UPS power management equipment
- Telecommunications equipment
- Data display equipment
- handheld device
- Attendance systems and terminals
| Dimensions | 95 × 65 × 25 mm |
|---|
specification
| categorization | parameters |
| System Information | |
| Processor/Main Frequency | Cortex-M3/96MHz |
| operating system | FreeRTOS |
| 2G/3G/4Gconnector | |
| firing power | LTE-TDD: Class 3 (23dBm+1/-3dB)
LTE-FDD: Class 3 (23dBm±2dB) WCDMA: Class 3 (24dBm+1/-3dB) TD-SCDMA: Class 3 (24dBm+1/-3dB) GSM900: Class 4 (33dBm±3dB) DCS1800: Class 1 (30dBm±3dB) GSM900 8-PSK: Class E2 (27dBm±3dB) DCS1800 8-PSK: Class E2 (26dBm±3dB) |
| receiver sensitivity | FDD B1: -96dBm(10M)
FDD B3: -96dBm(10M) FDD B5: -96dBm(10M) FDD B8: -96.5dBm(10M) TDD B38: -96dBm (10M) TDD B39: -97dBm (10M) TDD B40: -96.5dBm (10M) TDD B41: -96dBm (10M) WCDMA B1: -110dBm WCDMA B8: -111dBm TDSCDMA B34: -109dBm TDSCDMA B39: -109dBm GSM 900M: -109dBm GSM 1800M: -109dBm |
| LTE | Maximum support for non-CA CAT4
Support 1.4~20MHz RF bandwidth Downlink support for multi-user MIMO FDD: Maximum uplink rate 50Mbps, maximum downlink rate 150Mbps TDD: Maximum uplink rate 35Mbps, maximum downlink rate 130Mbps |
| WCDMA | 3GPP R8 DC-HSPA+
16-QAM, 64-QAM and QPSK modulation Maximum uplink 5.76Mbps Maximum downlink 42Mbps |
| TD-SCDMA | CCSA Relese 3
Maximum uplink 2.2Mbps Maximum downlink 4.2Mbps |
| GSM/GPRS | R99:
CSD transmission rate: 9.6Kbps/14.4Kbps GPRS: Support GPRS multi-slot class 12 Coding method: CS-1/CS-2/CS-3/CS-4 |
| serial port (computing) | |
| port number | 1 |
| interface standard | RS232: Sunken gold male DB9 connector
RS485: 5.08mm terminal block Only one of the two RS232 /RS485 serial port types can be selected for communication. |
| data bit | 7, 8 |
| stop bit | 1, 2 |
| check digit | None, Even, Odd |
| baud | TTL: 1200 bps~460800 bps |
| flow control | no-flow control
Half-duplex (RS485) Hardware RTS/CTS, DSR/DTR (RS232)
|
| hardware | |
| Configuration | Serial AT command
IOTService Serial Port Configuration Software IOTService Network Configuration Software |
| Firmware Upgrade | Serial or OTA upgrade |
| Basic parameters | |
| SIM card interface | Standard Daka (1.8V/3V) |
| sizes | 95mm x 65mm x 25mm |
| operating temperature | -40 ~ 70° |
| preservation environment | -45 ~ 105°C, 5 ~ 95% RH (no condensation) |
| Input Voltage | 9~36VDC |
| Operating Current | ~300mA@9V |
blueprint
Overall dimensions
interface definition
| functionality | name (of a thing) | descriptive |
| external interface | DC | DC 9~36V input |
| RS485/RS232 | RS485 A+ interface
RS485 B-Interface RS232 Rxd interface RS232 Txd Interface Use RS485 or RS232 (not both) |
|
| SIM Card | Standard SIM card insertion | |
| Earth | grounding | |
| Antenna | 4G SMA antenna connector | |
| RS232 | 9-PIN RS232 | |
| LED indicator | NET (Internet) | Network Status Indicator
0.2s On -> 1.8s Off: Network Search Status 1.8s On -> 0.2s Off: Standby (currently no such standby) 0.125 On -> 0.125 Off: Network normal communication status |
| Link | Socket status two-color indicator
Blue On: Socket A channel communication is established normally. Green On: Socket B channel communication is established normally. |
|
| Active | Serial data send/receive dual-color indicator
Blue On: Serial port has data output Green On: Serial port has data input |
|
| Power | 3.3V power indicator | |
| Mode | Network Mode Indicator
On: Connect to 4G LTE network Off: Connect to other |
|
| Signal | Signal strength indicator registered to the network
On: Strong signal strength (>=22) 0.9s On -> 0.9s Off: Medium signal strength (22>Signal>15) 0.3s On -> 1.2s Off: slightly weaker signal strength (15>Signal>4) Off: weak signal strength (usually no antenna plugged in) |
|
| buttons | Reload | Long press for more than 3 seconds to release, the parameter restores the factory setting |
| dipswitch | Protect | Parameter protection function
on: parameter protection, at this time can not modify the product parameters off: the parameter is not protected, the parameter can be modified at this time. |
Models and accessories
Needs to be fixed
Related products
Pressure sensors
¥601 – ¥780
This product has multiple variants. The options may be chosen on the product page
data acquisition
¥350
This product has multiple variants. The options may be chosen on the product page
serial port server
WiFi serial server RS232 to WiFi small size networking communication module device WE-W202S
¥69
data acquisition
Industrial 16-channel digital input RS485 data wireless acquisition module WE-TDI16RM
¥350
English 
简体中文