WIFI6 in the smart home
A well-known smart home system integrator in the industry develops smart door lock systems. In order to improve market competition, the smart door lock is required to integrate the mainstream wireless communication modules in the market to support home gateway networking, which puts high requirements on the power consumption of wireless modules. By comparing the Bluetooth module andWIFImodule's ease of networking and the versatility of the home environment gateway, the customer decided to use theWIFI6Module.
Major technology needs:
- Supports WIFI6 protocol;
- Supports battery power and low-power mode;
- small volume
- quality-price ratio
Solution:
WE-SE1 WIFI6 IOT Module
ES1 is an IOT module that supports WiFi6 and BLE5.1 wireless protocols. It is designed based on ESWIN's ECR6600 chip, which has powerful performance and supports the latest 802.11ax protocol, which has a wider coverage, higher rate and lower power consumption than the traditional 802.11n/ac protocol; the built-in 240Mhz high-performance MCU can be widely used in smart home, industrial control, video transmission, voice processing and other applications. The built-in 240Mhz high-performance MCU can be widely used in smart home, industrial control, video transmission, voice processing and other application areas.
ES1 module supports freeRTOS operating system, which is convenient for customers' secondary development. The module supports low-power mode, which is suitable for applications with stringent power consumption requirements. The module's ultra-small size of 18*12.5mm makes it easy to be integrated into products with smaller dimensions.
WiFi
- Supports 802.11ax/n/g/b 2.4G WiFi6 protocols
- Support AP, STA, WiFi direct mode
- Supports WEP, WPA, WPA2, WPA3
- Supports WMM QoS
- Support All guard interval (0.8/1.6/3.2us)
- Supports 802.11ax MCS0 to MCS7 rates
- Maximum wireless rate 86Mbps
- Supports upstream and downstream bi-directional MU-OFDMA
- Beamformee/Mid-amble/DCM/Rx Alamouti STBC support
bluetooth
- Supports BLE5.1
- Supports 125kbps and 500kbps long distance transmission
- Supports BLE multi-device connectivity
- Support for AFH
- Maximum output power 10dBm
- Receiving sensitivity -95dBm
software
- Up to 240Mbps mains frequency
- Andes D10 32-bit MCU
- Supports low-power standby
- Supports 2MB flash, 292KB RAM, 1Kb eFUSE.
- Supports up to 19 GPIOs
- Support UART, I2C, SPI, SDIO, PWM, ADC and other interfaces.
- Supports IPEX antenna connectors or on-board PIFA antennas
- Module size: 18*12.5*3.5mm
- Operating voltage: 2.7V-3.6V
- Operating temperature range: -40°C~85°C
Our Advantages
- Supports the latest WIFI6 wireless protocol;
- Supports low-power mode;
- Compact size for easy integration and installation
- Cost-effective and more competitive in the market.
Content review.
English 
简体中文