Product Features
Main characteristics
◆可以同时探测1000个电子标签，天线探测距离空旷可达100米。
◆与WiFi热点（50mW）的通信距离不小于80米，组网简单。
◆ It can measure the wireless signal field strength of the electronic tag and calculate the actual distance of the tag.
◆Tags can be called for audible and visual reminders (audible and visual tags only)
◆可以连接4个读卡天线，读卡角度更广、定位更准确。
◆读卡天线可延展30米（115200bps），安装部署方便。
◆Provides open protocols so that third-party systems can easily communicate with the card reader over the network.
◆提供SDK开发包，方便用户开发自己的标签定位管理系统。
◆POE供电或10～26V宽电压供电，每个读卡器消耗电流不超过800mA（12V）。
¥980
WE-RWN300网络读卡基站可以POE供电或DC供电，通过WiFi无线方式或POE以太网接入网络，可以在有WiFi信号的地方快速部署定位基站。读卡器探测标签的距离旷可达100米，不仅可以读取电子标签的ID值，而且可以通过测量电子标签的无线信号场强而计算得出标签的实际距离。若干个基站（读卡器）一起工作，就可以确定有效范围内的电子标签的具体位置，实现对人员、物品位置的实时监控，方便人员、物品的跟踪与查找。
WE-RWN300网络读卡基站可以外接四个读卡天线，一个主用，三个备用，使用其中任意一个即可。一个基站安装点也可以二个读卡天线或四个读卡天线都连接，二个读卡天线一个向左，一个向右；四个读卡天线一个向左，一个向右；一个向前，一个向后，这样读卡角度更广，定位更准确。标签定位被广泛应用在智能仓库管理、物流跟踪、室内导航、人员管理等众多应用领域。
| Weight | 530 g |
|---|---|
| Dimensions | 121 × 78 × 51.4 mm |
specification
| sports event | norm |
| indicator light | 【BT】:蓝牙运行指示灯
常亮：蓝牙连接正常 常灭：蓝牙断开连接 |
| [RUN], system operation indicator
Always on (occasional flashing): online normal Always off (occasional flashing): abnormal connection |
|
| 【WiFi】，WiFi无线工作指示灯 | |
| Always on: normal connection with WiFi hotspot. | |
| Constantly off: abnormal connection with WiFi hotspot. | |
| 【Mode】，模式指示灯
常亮：WIFI模式。 常灭：以太网模式。 |
|
| 【ANT】，读卡天线0指示灯，读到一次标签闪一下。 | |
| Ethernet interface | 10M/100M Adaptive |
| POE供电 | |
| 支持DHCP、UDP协议 | |
| Provide SDK development kit, support access to third-party systems | |
| WiFi wireless | Wireless protocol: 802.11 b/g/n |
| Transmit power: 100mW | |
| Operating frequency: 2.4~2.4835GHz | |
| Provide open application communication protocols to support access to third-party systems | |
| Card Reader Antenna | Communication interface: RS232 serial port |
| Baud rate: 115200, 57600, 38400, 19200, 9600bps | |
| Interface specification: 4P terminal header (5V, GND, TXD, RXD) | |
| USB Parameter Setting | USB-mini interface, CH340 driver virtual serial port, Windows setup software. |
| 蓝牙参数设置 | 支持BLE 4.2规范 通信距离30米（视环境而定） |
| operating temperature | -40℃~85℃ |
| Operating humidity | 湿度小于95%(无凝结) |
| Installation | 吸顶安装 / 墙壁安装（壁挂式、抱杆、抱箍、导轨安装） |
| power supply (of an appliance etc) | POE，12V（1A），支持DC12V-DC26V宽幅电压供电 |
| sizes | 长121mm ×宽78mm×高51.4mm |
| waterproof and dustproof | IP67 |
| weights | 530g |
Related drawings
| connector | name (of a thing) | norm | clarification |
| WiFi antenna | WiFi | SMA outer screw bore | Connect 2.4G WiFi antenna |
|
Card Reader Antenna （ANT0/4） |
G | Power Ground (Output) |
3.5mm terminal block to connect the WE-TX20 card reader antenna.
|
| R | RS232 data reception | ||
| T | RS232 data transmission | ||
| V | Power supply 5V (output) | ||
| indicator light | BT | 蓝牙运行指示灯 | 常亮：蓝牙连接正常
常灭：蓝牙断开连接 |
| RUN | Equipment operation indicator | Always on (occasional flashing): online normal
Always off (occasional flashing): abnormal connection |
|
| WIFI | WIFI connection indicator | The reader is connected to a WIFI network and the light is on. | |
| Mode | 模式指示灯 | WIFI/以太网模式指示 | |
| ANT0 | Card Reader Antenna 0 Indicator | The read antenna flashes once for each tag read. | |
| POE接口 | POE | 标准48VPOE接口 | 内置降压电压，48V转12V |
| LAN | 10/100M Adaptive | Reporting of label data through the web interface | |
| Power connector
DC12V |
+ | Power Supply Positive (12V) | 3.5mm terminal block, voltage range 10V~26V (12V recommended) |
| – | POWER GROUND |
Networking Description
WE-RWN300读卡器可以将读到的标签信息上报给位置服务器，位置服务器对数据进行综合运算后得出标签的具体位置。
WE-RWN300网络读卡器可以接4个读卡天线，4个接口相互备用，平时默认1个接口连接读卡天线。在需要全向读卡的场合，可以把2根或4根读卡天线都连接上，一根朝左，一根朝右，一根朝前，一根朝后，读卡更全面，定位更准确。
Related products
data acquisition
Industrial 8-channel Analog Input Ethernet Data Wireless Acquisition Module WE-TAI08EM
¥350
This product has multiple variants. The options may be chosen on the product page
English 
简体中文