Custom Filter Text

Active RFID 485 Reader Base Station WE-RU01

有源RFID485读卡基站 WE-RU01
有源RFID485读卡基站 WE-RU01 - Image 2

 Product Features

  • It can detect 100 electronic tags at the same time, and the antenna detection distance can reach 100 meters in the open.
  • The wireless signal field strength of the electronic tag can be measured and the actual distance of the tag can be calculated.
  • 10 tags can be called for audible and visual alerts at the same time (only available for audible and visual alert tags)
  • The readout antenna can be extended up to 50 meters (9600bps) for easy installation and deployment.
  • Provides open protocols to facilitate communication between third party systems and card readers.
  • C++ source code reference is provided to facilitate users to develop their own labeling and positioning management system.
  • Wide voltage supply from 10 to 26V, each reader consumes no more than 200mA (12V)
  • Aluminum alloy shell, sturdy and durable. Fixed lugs on both sides for easy wall mounting

¥450

SKU: WE-RU01 Categories: , Tags: , , , ,

Product Overview

RS485 reader WE-RU01 base station installs a reading antenna, detects the tag distance open up to 100 meters. The reader can not only read the ID value of the electronic tag, but also can calculate the actual distance of the tag by measuring the wireless signal field strength of the electronic tag. A number of positioning base station (reader) work together, you can determine the effective range of the specific location of the electronic tag, realizing the location of personnel, goods real-time monitoring, convenient personnel, goods tracking and finding.

Application Areas

Tag positioning is widely used in many applications such as intelligent warehouse management, logistics tracking, indoor navigation, and people management.

Distance measurement formula

This product calculates the distance between the electronic tag and the antenna by measuring the wireless signal field strength of the tag, and the distance and the wireless signal strength are in an exponential curve relationship as follows:

Due to chart size limitations, only correspondences within a distance of 7 meters are shown
In the above graph, there are 3 values that we need to measure repeatedly to calibrate.
1. L0: The signal strength when the distance between the tag and the reader is 0 cm, the measured value is -8dBm.
2.L1: Signal strength when the distance between the tag and the reader is 40cm, measured value is -20dBm.
3.L2: Signal strength when the distance between the tag and the reader is 100cm, measured value is -30dBm.
Based on these three values, the derived formula is as follows:

For specific algorithm implementation, please refer to our DEMO software source code

Positioning Properties

specification

sports event norm
System run light (RUN) Always on (occasional flashing) Successful online
Not lit (occasional flashing) Online failure.
Card Reader Antenna Light (ANT) The tag signal flashes every time it is read. The more tags the faster it flashes.
RS485 interface Baud rate can be set to 9600, 19200, 38400, 57600, 115200bps
Communication distance not less than 1000 meters
open protocol
Reader Antenna Interface 4P terminal header (5V, ground, serial transmit, serial receive)
RS232 standard protocol
Feeder lengths up to 50 meters
Operating temperature and humidity -40℃~85℃, humidity less than 95% (no condensation)
Installation Ceiling Mount/ Wall Mount
power supply (of an appliance etc) 12V (0.2A), supports DC10V-DC26V wide voltage supply
sizes 57mm × 82mm × 24mm (without fixing lugs on both sides)
weights 100g

blueprint

Installation dimensions

hardware interface

connector name (of a thing) norm clarification
Reader Antenna Interface ANT G Power Ground (Output) 3.5mm terminal block to connect the DS-TX10 card reader antenna.
R RS232 data reception
T RS232 data transmission
V Power supply 5V (output)
indicator light RUN Equipment operation indicator Always on (occasional flash) online success; not on (occasional flash) online failure
ANT Card Reader Antenna Indicator Receive a flash of tag data, the more tags the faster it flashes.
address dip switches ADDR 5-digit manual dialer Binary way to set the RS485 address of the device (0~31)
RS485 interface A A signal for RS485 interface 3.5mm terminal block for connection to RS485 bus
B B signal for RS485 interface
E Earth (generally not connected)
Power connector DC12V + Power Supply Positive (12V) 3.5mm terminal block, voltage range 10V~26V (12V recommended)
– POWER GROUND

Networking Description

RS485 reader FB-RU01 can be connected to network reader FB-RN01 through RS485 bus, and one network reader can connect up to 32 RS485 readers.RS485 reader FB-RU01 will report the read tag information to network reader FB-RN01, and then the network reader will report all the tag information to the location server, and the location server The data is synthesized and calculated to arrive at the specific location of the tag.

The RS485 reader FB-RU01 is connected to the network reader FB-RN01 via the RS485 bus, and whichever network reader it is accessed by becomes a substation under that network reader. A FB-RN01 network reader can have up to 34 substations, each of which is an independent positioning base station.

The FB-RN01 network reader itself can be connected to 2 reading antennas, occupying two substations, No. 0 and No. 1. Then expand up to 32 FB-RU01 wired readers through 485 bus, each wired reader occupies 1 substation number.FB-RU01 wired reader has a 5-digit dialer which can dial out the value of 0~31, corresponding to substation No. 2~33 respectively, as detailed below:

substation number dialer substation number dialer substation number dialer substation number dialer
0 Network Card Reader ANT0 1 Network Card Reader ANT1
2 0 0 0 0 0 3 0 0 0 0 1 4 0 0 0 1 0 5 0 0 0 1 1
6 0 0 1 0 0 7 0 0 1 0 1 8 0 0 1 1 0 9 0 0 1 1 1
10 0 1 0 0 0 11 0 1 0 0 1 12 0 1 0 1 0 13 0 1 0 1 1
14 0 1 1 0 0 15 0 1 1 0 1 16 0 1 1 1 0 17 0 1 1 1 1
18 1 0 0 0 0 19 1 0 0 0 1 20 1 0 0 1 0 21 1 0 0 1 1
22 1 0 1 0 0 23 1 0 1 0 1 24 1 0 1 1 0 25 1 0 1 1 1
26 1 1 0 0 0 27 1 1 0 0 1 28 1 1 0 1 0 29 1 1 0 1 1
30 1 1 1 0 0 31 1 1 1 0 1 32 1 1 1 1 0 33 1 1 1 1 1

Resource support

Electronic Tag RS485 Reader WE-RU01 Product Manual

Active tag communication protocol

RS485 communication protocol

software package

Package Purchase

Network structure and support

RS485 reads the card FB-RU01 to be able to connect directly to this company's network reads the card FB-RN01, this may conveniently construct a complete coverage whole area reads the card network, carries on the position localization and the management to the whole area all electronic labels.
Typical topologies are listed below:

RS485 reader FB-RU01 sends the tag information received by the reading antenna to network reader FB-RN01 via RS485 bus, and the network reader sends the tag information in the whole area to the user's client via network again.

The network reader provides developed communication protocols, users can simply program to get the tag information in the whole area. Then on the basis of obtaining the original label data, develop their own applications, such as positioning, personnel management, warehouse management, logistics tracking and so on.

Related Products

ZigBee Base Station

Active RFID 485 to Ethernet Network Reader Base Station WE-RN01

¥585
Add to cart

The following products are our various types of labels, this product can not be used alone, you need to cooperate with our various card readers to meet your actual scene requirements

maybeContactsThe sales staff of the company will give you reference advice:

en_USEnglish
zh_CN简体中文 en_USEnglish