Custom Filter Text

Industrial ZigBee DTU Radio RS232/485 to ZigBee Wireless Transmission Converter WE-ZBP2400

工业级ZigBee DTU电台RS232/485转ZigBee无线传输转换器WE-ZBP2400
工业级ZigBee DTU电台RS232/485转ZigBee无线传输转换器WE-ZBP2400 - Image 2
工业级ZigBee DTU电台RS232/485转ZigBee无线传输转换器WE-ZBP2400 - Image 3
工业级ZigBee DTU电台RS232/485转ZigBee无线传输转换器WE-ZBP2400 - Image 4

 Product Features

  • The serial port supports RS-232 and RS-485 modes.
  • Baud rate range 2400bps ~ 921600bps;
  • 25 physical frequency bands, can effectively avoid its own band interference, can also be used to expand the frequency band to avoid the interference of WIFI and Bluetooth;
  • RF Characteristics: Output power: +8dBm, Receive sensitivity: -102dBm;
  • Eight-segment PAN IDs, in different network segments, can distinguish the network from the software without interfering with each other;
  • Eight sections of local address [destination address]. there can be 65536 ZigBe nodes within the same physical network segment and the same PAN ID;
  • Supports serial port passthrough mode and API mode;
  • Serial port parameters [baud rate, data bits, parity bits, stop bits] are configurable:
  • RF rate: 250Kbps;
  • Input voltage: 9~24V;
  • Maximum operating current: 50mA@DC9V;
  • Working temperature: -40℃ ~ +85

¥509

SKU: WE-ZBP2400 Category: Tags: , ,

WE-ZBP2400 is a serial port to wireless ZigBe communication radio device embedded with Digi's XBee module, users can complete the wireless ZigBee to serial port function without development. Through the switching of the bottom dip-switch, it can realize the transparent conversion from RS232/RS485 interface to 2.4G ZigBee, the maximum output power of the RF side is +8dbm, and the line-of-sight transmission distance is 1200 meters @5dbi antenna, the function diagram of WE-ZBP2400 is as follows

wiring method

RS232 connection

When FB-ZBP2400 selects RS-232 interface communication, it adopts three-wire 232 level to realize simple serial connection, and connects to the user's equipment through DB9 male connector.

RS485 connection

The FB-ZBP2400 provides an RS-485 level serial port when the two-way dip switch is set to the right position. RS-485 is a half-duplex communication method that requires only one pair of twisted-pair wires to realize data communication among multiple devices. RS-485 is a half-duplex communication method, which requires only a pair of twisted pair wires to realize data communication between multiple devices. The data is transmitted by balanced differential transmission, which requires the installation of termination resistors on the transmission line.

 

application scenario

Coal, Power, Industrial Controls, Equipment Retrofit

specification

Indicators Technical Parameters
Transmission distance (indoor) 90m
Transmission distance (outdoor) 1200~1600m
output power 63mW
data transmission rate 9600~230400 (software settable)
RF data transmission rate 250,000 bps
operating frequency 2.4GHz (2.4~2.4835GHz)
Extended Spectrum Range DSSS (Direct Sequence Spread Spectrum)
network topology Point-to-Point; Point-to-Multipoint, ZigBee
Sending Mode Broadcast Send or Destination Send
Input Voltage DC 9V-24V (12V recommended)
Maximum operating current 200mA@DC12V
indicator light Power supply; digital transceiver
Scope of work -40 to 85º C
data interface RS232 & RS485
Antenna Connections Glue Stick Antenna, Suction Cup Antenna, Feeder + Glue Stick Antenna, Fiberglass Antenna
Physical dimensions 121.2*66*29mm (without antenna)

blueprint

Product Size

interface definition

Models and accessories

connection with high-ranking officials

In addition to the main unit, the device is equipped with a 5dBi ZigBee omni-directional antenna. The antenna gain of 5dBi means: an RF signal source radiates a signal outward, if no antenna is used, the signal energy received at a certain place is assumed to be 1 unit, but with this antenna, the signal enhancement at that place will be 1,000 units, i.e., 5 times of 10, so this antenna is 5Bi. It should be noted that the antenna gain does not mean that the antenna can increase the energy, but only change the distribution of the radiated energy, the energy of the spherical radiation as far as possible to the radiating surface, about the principle and parameters of the antenna, please click to see the technical information "antenna principle and selection".

Resource support

WE-ZBP2400 User's Manual

en_USEnglish
zh_CN简体中文 ja日本語 en_USEnglish