Product Features
- Protocol conversion between RS232/RS485/RS422 and Wi-Fi/Ethernet
- Integrated Ethernet hardware protocols such as MAC.
- Integrated TCP/IP stack
- memory management
- 10/100M Ethernet Transceiver
- High-speed serial port, RS232, RS485, RS422 and other hardware interfaces.
- Based on eCos operating system, the product includes a web page, which is convenient for remote configuration, monitoring and debugging. The hardware interface meets the requirements of the national standard, and supports air discharge ±15KV and contact discharge ±8KV in terms of ESD.
- Using a highly integrated hardware and software platform.
- Server size 108mm x 146mm x 25mm
¥235
Product Overview
A complete solution for networking serial devices, this powerful product supports Wi-Fi or 10/100M Ethernet adaption, a full TCP/IP stack, and multiple data encryption methods to ensure data confidentiality.
The FB-W210 serial server can be connected via Ethernet cable or wireless for data transmission, which makes the integration of the product very easy. The product complies with the EMC Class B safety level, and can pass the relevant certification tests in various countries.
Application Areas
Serial servers connect serial devices to the Internet and transmit serial data in compliance with the TCP/IP protocol.
-
- Remote equipment monitoring
- Production Asset Tracking and Monitoring
- Security
- Industrial Sensors and Controllers
- Healthcare equipment
- ATM equipment
- Data acquisition equipment
- UPS Power Management Devices
- Telecommunications equipment
- Data display equipment
specification
| categorization | parameters |
| System Information | |
| Processor/Main Frequency | MIPS/320MHz |
| Flash/SDRAM | 16MB/32MB |
| operating system | Linux |
| Ethernet interface | |
| ports | 1 RJ45 |
| interface standard | 10/100M Base-T auto-negotiation |
| safeguard | Anti-reverse power supply. Static electricity: 8KV contact discharge, 15KV air discharge Surge: Differential mode 4KV, common mode 6KV |
| Network Transformer | integrated (as in integrated circuit) |
| network protocol | IP, TCP, UDP, DHCP, DNS, HTTP Server/Client, ARP, BOOTP, AutoIP, ICMP, Web socket, Telnet, uPNP, NTP, Modbus TCP |
| security protocol | TLS v1.2 AES 128Bit DES3 |
| IPV6 | Program support |
| wireless interface | |
| wireless standard | 802.11 b/g/n |
| frequency range | 2.412GHz-2.484GHz |
| network paradigm | STA/AP/STA+AP |
| Type of security | WEP/WPAPSK/WPA2PSK |
| encrypted | WEP64/WEP128/TKIP/ AES |
| firing power | 802.11b: +20dBm(Max.) |
| 802.11g: +18dBm(Max.) | |
| 802.11n: +15dBm(Max.) | |
| 802.11b: -89dBm | |
| receiver sensitivity | 802.11g: -81dBm |
| 802.11n: -71dBm | |
| Antenna Options | External: 3dBi antenna |
| serial port (computing) | |
| port number | 1 RS232/RS485/RS422 |
| interface standard | RS232：Submerged gold male DB9 connector |
| RS485/RS422: 5.08mm terminal block | |
| data bit | 8 |
| stop bit | 1, 2 |
| check digit | None, Even, Odd |
| baud | TTL: 2400 bps~460800 bps |
| flow control | No flow control. Hardware RTS/CTS, DSR/DTR (RS232) Software Xon/ Xoff Flow Control |
| hardware | |
| Web Configuration | Http Web Configuration |
| Customizable and customizable Http pages | |
| Configuration | Web Page Cli Commands XML file import Telnet Configuration IOTService Configuration Software |
| Firmware Upgrade | Web, IOTService Tools |
| Provides SDK. | Program support |
| Basic parameters | |
| sizes | 108mm x 146mm x 25mm |
| operating temperature | -25 ~ 85°C |
| preservation environment | 45 ~ 105°C, 5 ~ 95% RH (no condensation) |
| Input Voltage | 5~36VDC |
| Operating Current | ~200mA |
| power wastage | <700mW |
| Other information | |
| certificates | FCC/CE/RoHS |
blueprint
Product Size
interface information
RS232 interface description
The serial port of the device is a male port (pin), RS232 level (can be directly connected to the PC serial port), the pin order is the same as the PC's COM port, and when connected to the PC, please use the crossover cable (2-3 crossover, 7-8 crossover, 5-5 direct connection, 7-8 can not be connected)
RS485 Interface Description
RS485 has lead wires A(data+) and B(data-), when connecting with RS485 equipment, A(+) connects to A(+) and B(-) connects to B(-).
This product can be used with 32 terminal 485 devices, and special models can be used with 255 terminal 485 devices. Maximum communication distance
The 485 termination resistor is 120 ohms and is generally required for wiring over 300 meters. Note that A+ and B- must be hinged in a twisted pair to minimize signal interference.
RS422 Interface Description
RS422 has T+/T-/R+/R- lead wires, which are connected to the device RS422 in a cross-over manner.
RJ45 Interface Description
Resource support
WE-W220 User's Manual V1.3
Installation Manual
instruction manual
Code (if any)
Documentation
External resources
Chip Specification DATASHEET
Related products
¥268
English 
简体中文