Custom Filter Text

WiFi Module Serial to WIFI Low Power 2.4G Transceiver Wireless Module WiFi Networking Module WE-S2WM03

WiFi模块 串口转WIFI 低功耗2.4G收发无线模块WiFi联网模块WE-S2WM03
WiFi模块 串口转WIFI 低功耗2.4G收发无线模块WiFi联网模块WE-S2WM03 - Image 2

 Product Features

-Supports AirKiss one-click configuration function
-Start-up time of only 1 second
-Supports up to 4 configuration methods for easier configuration
Up to 6 GPIOs for user-selected control
-Supports Alink, the AliCloud platform
-3 power consumption modes for user selection
-Supports Websocket SSL, etc.
-Supports customized development

¥35

SKU: WE-S2WM03 Categories: , Tags: ,

WE-S2WM03 WiFi Wireless Transmission Module is a high performance and cost-effective single-sided stamp hole embedded WiFi module product. Module processor RTL8710BN. RTL8710BN is a highly integrated low power wireless WiFi chip, the chip integrates ARM-CM4, WLAN MAC, BBP, RF.

specification

Item Parameters
Wireless component  wireless standard IEEE802.11b/g/n
frequency range 2.412~2.484 GHz
receiver sensitivity 802.11b: -90 dBm @ 11Mbps (typical)

802.11g: -70 dBm @ 54Mbps (typical)

802.11n: -67 dBm @ MCS7 (typical)
data rate 802.11b: 11,5.5,2,1 Mbps

802.11g: 54,48,36,24,18,12,9,6 Mbps

802.11n: up to 150Mbps
modulation method DSSS, OFDM, DBPSK, DQPSK, CCK, QAM16/64
output power 802.11b: 17±2 dBm (typical)

802.11g: 15±1 dBm (typical)

802.11n: 13±2 dBm (typical)
Antenna Interface IPX/Microstrip
hardware part Interface Type Pin/stamp hole
interface definition please refer to the subsequent section (of a document)
operating voltage 3.3±0.3 V
Operating Current 150mA (typical)

7.5uA (DeepSleep Mode)

70uA (Standby Mode)

 
Storage temperature -40~+85 °C
operating temperature -20~75 °C
Overall dimensions 23*27mm
environmental certification RoHS
 

 

 

 

 

flexible

 

 

 

classifier for clothes, luggage, decorations; piece of work; a matter, an event

 

 

 

 

 

 

 

 

 

 

 Network type Infra/Adhoc/AP
security mechanism WEP/WPA-PSK/WPA2-PSK
Encryption Type WEP64/WEP128/TKIP/CCMP(AES)
AP Mode Supports 4 STA connections

Supports only inter-STA and AP communication, does not support STA and inter-STA communication

Encrypted authentication methods support OPEN, WEP, WPA-PSK
operating mode Auto/Command
serial port command AT+ instruction set
IP protocol IPv4/IPv6
network protocol tcp/udp/arp/icmp/dhcp/dns/http/igmp/ppoe

/AIRKISS/SmartConfig/WebSocket
Maximum Socket Connections 15
TCP connection Maximum number of connections: 8

Maximum number of Clients: 8

Maximum number of Servers: 3~4

Maximum number of Clients on the local Server: 4
UDP connection Maximum number of connections 5~6
Maximum transmission rate 44Kbytes
Parameter Configuration Methods Supports up to 4 parameter configuration methods:

Mode I. UART interface commands (AT command mode)

Mode 2, SmartConfig one-click mode

Way three, Web page parameter configuration

Way four, Udp remote way

Related drawings

Models and accessories

In order for users to quickly familiarize themselves with the use of the WE-S2WM03 modules, we provide users with a development evaluation kit.

 

caveat

WE-S2WM03 wireless module in the PCB board reflow oven temperature need to pay attention to, it is recommended not to exceed 180 degrees, the duration of 70 seconds or less is appropriate.

Resource support

WE-S2WM03 Module User's Manual

Microcontroller control code

en_USEnglish
zh_CN简体中文 en_USEnglish