WE-CUW series product is an XBee UART adapter with embedded Digi XBee wireless communication module, which can realize the function of serial to wireless communication. The switching of the bottom toggle switch supports the conversion of RS232 or RS485 interfaces to 2.4GHz wireless communication.The XBee UART adapter provides short-range wireless connectivity to any RS232/485 serial device. Unlike embedded wireless modules that require design integration and development time, these off-the-shelf adapters provide instant wireless connectivity to existing RS232/485 serial devices.
Embedded Digi XBee Wireless Communication Module XBee UART Adapter WE-CUW
Product Features
- Wide voltage supply 9 to 28V;
- Supports one or both of RS232 or RS485, single serial port mode, serial port can be selected by switching the toggle switch at the bottom, baud rate range 9600bps to 115200bps;
- Compatible with Zigbee, 802.15.4 or DigiMesh 2.4 firmware;
- The product can use Digi's XBee configuration and testing software XCTU to configure the XBee module within the product, and supports remote configuration of wireless devices through this product, convenient operation.
¥400
Dimensions | 79 × 97 × 26 mm |
---|
specification
exterior condition | Shell material | molded body |
Installation | 35mm DIN rail | |
Structural dimensions | 79 x 97 x 26mm | |
Power supply | Input Voltage | DC 9-28V |
LED indicator | POWER | bonus |
LINK | indigo plant | |
TX | pornographic | |
RX | green | |
RSSI | Green x3 | |
keystrokes | RESET | reset button |
COMM | XBee module reset button, 4 consecutive presses within 2 seconds to restore factory settings (network parameters, baud rate, etc.) | |
Serial Communication Toggle Switch | Toggle switch to switch RS232 or RS485 interface | |
power wastage | Power consumption at transmission (MAX) | 0.72W (Low Power XBee Module) |
Power consumption at rest (MIN) | 0.32W (Low Power XBee Module) | |
speed | RS485 | 9600~115200bps |
RS232 | 9600~115200bps | |
protocols | serial port communication protocol | Modbus-RTU |
wireless communications | communications module | Digi XBee |
communication protocol | ZigBee, DigiMesh or 802.15.4 | |
communications frequency | 2.4GHz | |
communications rate | 250Kbps | |
communication distance | Indoor sight distance 200m, outdoor sight distance 3km | |
physical interface
|
RS485 | 3Pin spacing 3.5mm |
RS232 | DB9 Male | |
Mains power input | 2Pin spacing 3.5mm | |
connection with high-ranking officials | Glue stick antenna or board mounted antenna | |
defend | 485/232 interface protection | Isolation: 3750 Vrms; ESD: 15KV;
Surge: 600W; lightning protection |
Power protection | Anti-reverse connection, over-current protection, over-voltage protection |
Selection Reference
Selection Reference
model number | descriptive |
WE-CUWPDM1P | RS485 to High Power XBee-Pro, DigiMesh Protocol |
WE-CUWPDM2P | RS232 to High Power XBee-Pro, DigiMesh Protocol |
WE-CUWPDM3P | RS232/485 to High Power XBee-Pro, DigiMesh Protocol |
WE-CUWSDM1P | RS485 to Low Power XBee, DigiMesh Protocol |
WE-CUWSDM2P | RS232 to Low Power XBee, DigiMesh Protocol |
WE-CUWSDM3P | RS232/485 to low power XBee, DigiMesh protocols |
WE-CUWPZB1P | RS485 to High Power XBee-Pro, ZigBee Protocol |
WE-CUWPZB2P | RS232 to High Power XBee-Pro, ZigBee Protocol |
WE-CUWPZB3P | RS232/485 to High Power XBee-Pro, ZigBee Protocol |
WE-CUWSZB1P | RS485 to Low Power XBee, ZigBee Protocol |
WE-CUWSZB2P | RS232 to Low Power XBee, ZigBee Protocol |
WE-CUWSZB3P | RS232/485 to Low Power XBee, ZigBee Protocols |
WE-CUWPPP1P | RS485 to High Power XBee-Pro, 802.15.4 Protocol |
WE-CUWPPP2P | RS232 to High Power XBee-Pro, 802.15.4 Protocol |
WE-CUWPPP3P | RS232/485 to high power XBee-Pro, 802.15.4 protocols |
WE-CUWSPP1P | RS485 to Low Power XBee, 802.15.4 Protocol |
WE-CUWSPP2P | RS232 to Low Power XBee, 802.15.4 Protocol |
WE-CUWSPP3P | RS232/485 to low-power XBee, 802.15.4 protocols |